Welcome to Erdi Laser Ltd, Your laser location & Navigation strategic partner
Global Certificate: GB/T19001-2016 / ISO 9001:2015
If you have questions about our products, Fill out the form below and we will answer any questions you have.
Tips: Fields marked with * are required.

    sales@erdilaser.com
    en English
    af Afrikaansar Arabiczh-CN Chinese (Simplified)nl Dutchen Englishfr Frenchde Germanit Italianja Japanesefa Persianpt Portugueseru Russianes Spanishtr Turkish
    1. Home
    2. /
    3. Product
    4. /
    5. Laser Rangefinder
    6. /
    7. 1535nm Laser Rangefinder-G6K10

    1535nm Laser Rangefinder-G6K10

    SKU： LRF-1535-G6K10

    1535nm Laser Rangefinder-G6K10 laser range finder is a pulse laser range finder, which has the advantages of small size, light weight, low power consumption, long working distance, long service life, and safe working band for human eyes. It is an important technical equipment to improve product aiming accuracy,Visibility is not less than 10km under clear-sight conditions, and the ranging distance for vehicles (2.3m×2.3m targets) is ≥6000m.

    If you have questions about our products, Fill out the form below and we will answer any questions you have.
    Tips: Fields marked with * are required.

      PDF Download

      Laser Rangefinder parameter

      Item Technical parameter
      Working wavelength 1.54μm±0.02μm
      Range scope 30m~6000m
      Object Visibility is not less than 10km under clear-sight conditions, and the ranging distance for vehicles (2.3m×2.3m targets) is ≥6000m
      Main function

       

      		 Single ranging and continuous ranging
      Three-target ranging and front and rear target indication
      Self-test function (including: current APD temperature, high voltage value, internal voltage, blind zone value)
      Standby wake-up function can be realized by modifying to TTL interface
      Ranging accuracy ±2m
      Continuous ranging frequency 0.5Hz-10Hz
      Accuracy rate ≥98%
      Effective Clear Aperture 25mm
      Number of laser pulses fired between mean failure (MNBF) ≥1×106 times
      Voltage DC5V
      Work energy consumption ≤2W(@1hz)
      Standby power consumption ≤0.5W
      Size 50mm×38mm×75mm
      Weight <104g
      Cooling method Conduction cooling
      Working temperature -40℃～+65℃
      Storage temperature -55℃～+70℃

      Laser Rangefinder Electrical Interface

      Electrical Interface

      Electrical connector model: J30J; corresponding plugs and cables shall be provided by Party B. The detailed definition of the electrical interface is as follows:

      Table 1 Interface definition

      Pin No. Definition Function Remark
      1 GND Land  
      2 GND Land  
      3 GND Land  
      4 VCC 5V 5V input positive  
      5 VCC 5V 5V input positive  
      6 RS422  RX+ Serial receiving+ Host computer to Laser rangefinder
      7 RS422  RX-  Serial port receiving- Host computer to Laser rangefinder
      8 RS422 TX- Serial send- Laser rangefinder to Host computer
      9 RS422 TX+  Serial send+ Laser rangefinder to Host computer

      Laser Rangefinder Structure size

      Laser Rangefinder Communication protocol

      The data transmission between the rangefinder and the host computer includes the following contents:

      Control commands: including starting ranging, continuous ranging, single ranging, query commands, etc.

      Loopback data: including distance information, ambient temperature, range finder status, etc. The data exchange between the distance measuring machine and the host computer adopts 422 bus. The specific software communication protocol is as follows:

      Communication format: RS422 communication, baud rate 115200bps;

      Data format: 8-bit data, one start bit, one stop bit, no parity check, the data consists of header byte, command part, data length, parameter part, check byte;

      Communication mode: the main control and the distance measuring machine adopt the master-slave communication mode, the master control sends control commands to the distance measuring machine, and the distance measuring machine receives and executes the instructions. In the ranging state, the rangefinder sends back the data and status of the rangefinder to the upper computer according to the ranging cycle. The communication format and command content are shown in the following table.

      Master send

      The sending message format is as follows:

      STX0 CMD LEN DATA1H DATA1L CHK

       

      Table 2 Description of sending message format

      No. Name Discription Code Remark
      1 STX0 Message start flag 55(H)
      2 CMD Command word See table 3
      3 LEN Data length The number of all bytes except the start sign, command word and checksum
      4 DATAH Parameter
      5 DATAL
      6 CHK XOR check In addition to the parity byte, other bytes are exclusive or

      Laser Rangefinder Electrical Interface

      Electrical Interface

      Electrical connector model: J30J; corresponding plugs and cables shall be provided by Party B. The detailed definition of the electrical interface is as follows:

      Table 1 Interface definition

      Pin No. Definition Function Remark
      1 GND Land  
      2 GND Land  
      3 GND Land  
      4 VCC 5V 5V input positive  
      5 VCC 5V 5V input positive  
      6 RS422  RX+ Serial receiving+ Host computer to Laser rangefinder
      7 RS422  RX-  Serial port receiving- Host computer to Laser rangefinder
      8 RS422 TX- Serial send- Laser rangefinder to Host computer
      9 RS422 TX+  Serial send+ Laser rangefinder to Host computer

      Laser Rangefinder Structure size

      Laser Rangefinder Communication protocol

      The data transmission between the rangefinder and the host computer includes the following contents:

      Control commands: including starting ranging, continuous ranging, single ranging, query commands, etc.

      Loopback data: including distance information, ambient temperature, range finder status, etc. The data exchange between the distance measuring machine and the host computer adopts 422 bus. The specific software communication protocol is as follows:

      Communication format: RS422 communication, baud rate 115200bps;

      Data format: 8-bit data, one start bit, one stop bit, no parity check, the data consists of header byte, command part, data length, parameter part, check byte;

      Communication mode: the main control and the distance measuring machine adopt the master-slave communication mode, the master control sends control commands to the distance measuring machine, and the distance measuring machine receives and executes the instructions. In the ranging state, the rangefinder sends back the data and status of the rangefinder to the upper computer according to the ranging cycle. The communication format and command content are shown in the following table.

      Master send

      The sending message format is as follows:

      STX0 CMD LEN DATA1H DATA1L CHK

       

      Table 2 Description of sending message format

      No. Name Discription Code Remark
      1 STX0 Message start flag 55(H)
      2 CMD Command word See table 3
      3 LEN Data length The number of all bytes except the start sign, command word and checksum
      4 DATAH Parameter
      5 DATAL
      6 CHK XOR check In addition to the parity byte, other bytes are exclusive or

      Related products

      Warm prompt:

      ERDI provides timely and thoughtful after-sales service and technical support, and solves the problems encountered by customers in the use of products at the first time;

      All of ERDI's rangefinder modules use CLASS 1 eye-safe wavelength light source;

      The reliability and stability of the laser rangefinder module are the key indicators of the product, and only the products that have passed the long-term practice test have the basis for batch application;

      ERDI provides cost-effective products to serve various drone customers, and currently supports thousands of drones with accumulated supporting equipment;

      The high precision and versatility of the integrated navigation system and the high reliability and high stability of the laser gyroscope are the key indicators of the product. Only products that have been tested in practice for a long time have the basis for mass application.

      Your Strategic Partner For Laser Positioning & Navigation.
      We are always striving to innovate and improve.
      We only do R&D and manufacturing of the entire industry chain of laser rangefinder.

      Product
      Contact

      Daily from 8 am to 9 pm
      TEL:+86-28-87897578
      E-mail:sales@erdilaser.com
      ADD:No. 226, 2nd Floor, Building 1, No. 1388, Middle Section of Tianfu Avenue, Chengdu High-tech Zone, China (Sichuan) Pilot Free Trade Zone,Chengdu, 610213,China.

      © 2010 – 2022 Erdi Laser Ltd. | All rights reserved

      Home
      Contact

      Information