DESCRIPTION
The LR100-02 laser target designator is a powerful assistant for precision strikes on the battlefield. It is compact, easy to install and carry, and can be flexibly applied to a variety of combat equipment. When working, it can emit high-energy laser beams to clearly indicate targets for guided weapons. With its excellent anti-interference ability, it can also operate stably in complex environments, ensuring the accuracy of target indication and effectively improving weapon hit accuracy and combat effectiveness.
| Parameter Indicators |
| Module |
LDR100K1 |
| Pump Source |
Laser LD (Laser Diode) Pumping |
| Cooling Method |
Passive cooling, no temperature control |
| Working Mode |
Laser Ranging, Laser target indication |
| Operating Wavelength |
1064nm±1nm |
| Pulse Energy |
≥Both 85mj and 160mj can be switched |
| Laser Energy Stability |
Within a single irradiation cycle, the pulse energy fluctuation does not exceed 8% of the average energy. |
| Pulse Width |
≥15ns±5ns |
| Beam Divergence Angle |
≤0.2mrad |
| Stability of The Laser Optical Axis |
≤0.05mrad |
| Ranging performance |
| Ranging frequency |
1~25Hz |
| Continuous Laser Ranging Time |
5min(1Hz)/1min (5Hz)/20S(20Hz) |
| Minimum measuring distance |
≤200m |
| Maximum measuring distance |
≥30km (Under the conditions of a target with a size of 2.3m×2.3m, a diffuse reflectance coefficient of not less than 0.2, a visibility of not less than 40 km, and a relative humidity of not more than 70%)
|
| Ranging accuracy |
±1m |
| Rate of successful measurement |
98% |
| Ranging mode |
continuously working for 5min, rest for 4min, continuous 5 cycles(at low/normal temperature)
continuously working for 5min, rest for 4min, continuous 2cycles(at high temperature and 85mj output)
continuously working for 2 min, rest for 4min, continuous 2cycles(at high temperature and 160mj output)
|
MECHANICAL DIMENSION(mm)

APPLICATION NOTES
The 30km LR160 is built on the LDR100K1 module: diode-pumped, passively cooled with no temperature control, emitting at 1064nm±1nm in either ranging or target indication mode. Pulse energy is switchable between ≥85mJ and ≥160mJ, with fluctuation within a single irradiation cycle not exceeding 8% of the average energy and pulse width ≥15ns±5ns. Beam divergence is ≤0.2mrad and laser optical axis stability ≤0.05mrad, so the illuminated footprint stays controlled across the full standoff. Maximum measuring distance is ≥30km against a 2.3m by 2.3m target of diffuse reflectance ≥0.2, visibility ≥40km and relative humidity ≤70%; ranging accuracy is ±1m with a 98% rate of successful measurement at 1~25Hz, and minimum measuring distance is ≤200m. Because 160mJ is the thermally demanding setting, sustained use follows the stated cycles: 5 minutes working and 4 minutes rest for 5 cycles at low or normal temperature, 2 such cycles at high temperature with 85mJ output, and 2 minutes working with 4 minutes rest for 2 cycles at high temperature with 160mJ. That profile is suited to long-standoff designation from airborne pods and observation posts in clear air, the regime the site's notes on 1064nm target indication describe.
SELECTION GUIDANCE
Select the 30km LR160 when the engagement needs measurement beyond 20km and the site genuinely provides visibility of ≥40km at ≤70% relative humidity, and when 160mJ of designation energy is needed for part of the mission while 85mJ is acceptable for sustained work. If typical visibility is nearer 23km, the 20km model states ≥20km at ≥100mJ and ≤0.15mrad divergence, and its 5min/1min/20s ranging cycles apply without two-tier energy switching. If the platform is a miniaturized pod or loitering munition stepping down to 15km, the 80mJ model states 90 seconds working with 60 seconds pause over -40°C to +60°C. Acceptance should write the reference target size, diffuse reflectance, visibility and humidity into the specification, since the ≥30km figure depends on all four, and should then verify both energy settings, the ≤8% in-cycle stability, ≤0.2mrad divergence, ≤0.05mrad axis stability, ≤200m minimum distance, ±1m accuracy, the 98% success rate, 1~25Hz ranging frequency and the high-temperature 160mJ cycle count.
FREQUENTLY ASKED QUESTIONS
What is the maximum ranging distance of the LDR100K1 laser target designator?
It reaches >=30km for a 2.3m x 2.3m target with a diffuse reflectance coefficient of not less than 0.2, a visibility of not less than 40 km and a relative humidity of not more than 70%.
Can the pulse energy of the LDR100K1 be switched?
Yes, both 85mj and 160mj can be switched.
What is the ranging accuracy and ranging frequency of the LDR100K1?
Ranging accuracy is +/-1m across a ranging frequency of 1~25Hz.
What is the operating wavelength and beam divergence angle of the LDR100K1?
The operating wavelength is 1064nm+/-1nm and the beam divergence angle is <=0.2mrad.
What is the minimum measuring distance and measurement success rate of the LDR100K1?
The minimum measuring distance is <=200m and the rate of successful measurement is 98%.
ORDERING INFORMATION
Is there a minimum order quantity?
There is no minimum order quantity. Single units and evaluation samples are accepted.
What is the sample lead time?
Samples are shipped within 1 week after order confirmation.
What is the batch production lead time?
Batch production is delivered within 1 month after order confirmation.
RELATED TECHNICAL GUIDES
Further ERDI Laser engineering references on 1064 nm laser designation and target designation payloads: