DESCRIPTION
The LRF1525C-02 laser rangefinder utilizes 1535nm erbium-glass laser technology, supporting both single-pulse and continuous ranging modes (adjustable frequency: 1–10Hz). It features distance filtering, front/rear target indication, and self-diagnostic functions (monitoring internal voltage, temperature, etc.). This product is a transceiver lens, suitable for long-distance differential ranging, with a minimum ranging distance of not less than 50 meters.
TECHNICAL SPECIFICATIONS
| Project |
Performance Indicators |
| Model |
LRF1525C |
| Laser Wavelength |
1.54μm±0.02μm |
| Eye- safety |
Class Ⅰ |
| Divergence Angle |
≤0.3 mrad |
| Laser Energy |
≥500 μJ |
| Launch Lens Diameter |
Φ15 mm |
| Receiver Lens Diameter |
Φ50 mm |
| Measuring Range
(Reflectance 30%; visibility ≥ 18 km.)
|
4m×6m Objective ≥15 km |
| Minimum Range |
≤50 m |
| Ranging Frequency |
0.5Hz ~10Hz |
| Communication interface |
RS422 |
| Ranging Accuracy |
±2 m |
| Range Resolution |
≤0.1m |
| Precision Rate |
≥98% |
| False Alarm Rate |
≤1% |
| Pin-in-lead package model |
J30J |
| Supply Voltage |
DC12 V |
| Standby power consumption |
≤1.2W |
| Average power consumption |
≤2 W |
| Peak Power Consumption |
≤3W |
| Weight |
≤400g |
| Dimension (L×W×H) |
125mm×85mm×58.5mm |
| Operating Temperature |
-40~+70 ℃ |
| Storage Temperature |
-55~+75 ℃ |
| Impact Resistance |
Meet the MIL-STD-810G testing standard |
| Vibration Resistance |
Meet the MIL-STD-810G testing standard |
OUTLINE DIMENSION(mm)

PIN INTERFACE
Electrical connector model: J30J; The corresponding plug and cable shall be provided by Party B. The detailed definition of the electrical interface is shown in the following table:
Interface Definition
| Pin |
Definition |
Function |
Remarks |
| 1 |
GND |
Serial Port Ground |
|
| 2 |
GND |
12V Input Negative |
|
| 3 |
GND |
12V Input Negative |
|
| 4 |
VCC 5V |
12V Input Positive |
|
| 5 |
VCC 5V |
12V Input Positive |
|
| 6 |
RS422 RX+ |
Serial Port Receive + |
From the upper computer to the rangefinder |
| 7 |
RS422 RX- |
Serial Port Receive - |
From the upper computer to the rangefinder |
| 8 |
RS422 TX- |
Serial Port Transmit - |
From the rangefinder to the upper computer |
| 9 |
RS422 TX+ |
Serial Port Transmit + |
From the rangefinder to the upper computer |
APPLICATION NOTES
The LRF1525C uses a 1535 nm erbium-glass source to reach ≥15 km on a 4 m x 6 m target at 30% reflectance under visibility of ≥18 km, with ≥500 µJ energy, ≤0.3 mrad divergence, a Ø15 mm launch lens and a Ø50 mm receiver, in single-pulse or continuous ranging with frequency adjustable from 1 Hz to 10 Hz. Distance filtering and front/rear target indication sit alongside self-diagnostic monitoring of internal voltage and temperature, which is what suits it to layered scenes and to remotely monitored installations.
Accuracy of ±2 m, ≤0.1 m range resolution, a minimum range of ≤50 m, an accuracy rate of ≥98% and a false alarm rate of ≤1% define a long-distance differential ranging unit for airborne pods, vehicle platforms and fixed observation sites. RS422 over a J30J connector, DC 12 V with ≤1.2 W standby, ≤2 W average and ≤3 W peak, ≤400 g in 125 x 85 x 58.5 mm, -40 °C to +70 °C operation and MIL-STD-810G shock and vibration qualification describe the deployment envelope.
SELECTION GUIDANCE
Select the LRF1525C where 15 km on a 4 m x 6 m target, front/rear target indication and self-diagnostics are the deciding features. Where the extra 3 km of reach is needed and the larger 125 x 100 x 70 mm envelope is acceptable, the 18 km member provides ≥18 km with the same Class Ⅰ eye safety, ±2 m accuracy and three-target detection; where the target set is vehicle, human or UAV sized and mass binds, the 6 km and 8 km 1535 nm TOF sensors are the closer fit.
At acceptance, verify ≥15 km on a 4 m x 6 m target at 30% reflectance and visibility ≥18 km, the ≤50 m minimum range, ±2 m accuracy, ≤0.1 m range resolution, the 0.5 Hz to 10 Hz rate and the 1 Hz to 10 Hz continuous mode, distance filtering and front/rear target indication, the self-diagnostic voltage and temperature readouts, RS422 over the J30J connector, DC 12 V with ≤3 W peak, and MIL-STD-810G shock and vibration qualification.
FREQUENTLY ASKED QUESTIONS
What is the maximum range of the LRF1525C-02?
It reaches ≥15 km on a 4 m × 6 m target, measured at 30% reflectance with visibility ≥18 km.
Which functions does the LRF1525C-02 offer besides basic ranging?
It provides distance filtering, front/rear target indication and self-diagnostic functions (monitoring internal voltage, temperature, etc.). It supports both single-pulse and continuous ranging at an adjustable 1-10Hz.
What are the accuracy and minimum range?
Ranging accuracy is ±2 m with a range resolution of ≤0.1 m, and the minimum range is ≤50 m.
What are the transmitting and receiving lens diameters?
The launch lens is Φ15 mm and the receiver lens is Φ50 mm, with laser energy ≥500 μJ and a divergence angle of ≤0.3 mrad.
What are the supply voltage, power consumption and weight?
It is powered from DC 12 V with standby ≤1.2 W, average ≤2 W and peak ≤3 W. Weight is ≤400 g and dimensions are 125mm×85mm×58.5mm.
ORDERING INFORMATION
Is there a minimum order quantity?
There is no minimum order quantity. Single units and evaluation samples are accepted.
What is the sample lead time?
Samples are shipped within 1 week after order confirmation.
What is the batch production lead time?
Batch production is delivered within 1 month after order confirmation.
RELATED TECHNICAL GUIDES
Further ERDI Laser engineering references on 1535 nm eye-safe laser ranging modules and TOF sensors: