DESCRIPTION
The LRF1830C laser ranging module utilizes a 1535nm erbium-glass laser source and operates on the single-pulse Time-of-Flight (TOF) principle, achieving a maximum range of ≥18km (for a 4m×6m target). It integrates a laser emitter, transmitting/receiving optical systems, and a control circuit board, delivering high accuracy (±2m) and multi-target ranging capability (up to three targets). This product is a transceiver lens, suitable for long-distance differential ranging, with a minimum ranging distance of not less than 50 meters.
TECHNICAL SPECIFICATIONS
| Project |
Performance Indicators |
| Model |
LRF1830C |
| Laser Wavelength |
1.54μm±0.02μm |
| Eye- safety |
Class Ⅰ |
| Divergence Angle |
≤0.3 mrad |
| Laser Energy |
≥500 μJ |
| Launch Lens Diameter |
Φ18 mm |
| Receiver Lens Diameter |
Φ60 mm |
| Measuring Range
(Reflectance 30%; visibility ≥ 18 km.)
|
4m×6m Objective ≥18 km |
| Minimum Range |
≤50 m |
| Ranging Frequency |
0.5Hz ~10Hz |
| Number of multi-target detections |
RS422 |
| Ranging Accuracy |
±2 m |
| Range Resolution |
≤0.1 m |
| Precision Rate |
≥98% |
| False Alarm Rate |
≤1% |
| Pin-in-lead package model |
J30J |
| Supply Voltage |
DC12 V |
| Standby power consumption |
≤1.2W |
| Average power consumption |
≤2 W |
| Peak Power Consumption |
≤3W |
| Weight |
≤400g |
| Dimension (L×W×H) |
125mm×100mm×70mm |
| Operating Temperature |
-40~+70 ℃ |
| Storage Temperature |
-55~+75 ℃ |
| Impact Resistance |
Meet the MIL-STD-810G testing standard |
OUTLINE DIMENSION(mm)

PIN INTERFACE
Electrical connector model: J30J; The corresponding plug and cable shall be provided by Party B. The detailed definition of the electrical interface is shown in the following table:
Interface Definition
| Pin |
Definition |
Function |
Remarks |
| 1 |
GND |
Serial Port Ground |
|
| 2 |
GND |
12V Input Negative |
|
| 3 |
GND |
12V Input Negative |
|
| 4 |
VCC 5V |
12V Input Positive |
|
| 5 |
VCC 5V |
12V Input Positive |
|
| 6 |
RS422 RX+ |
Serial Port Receive + |
From the upper computer to the rangefinder |
| 7 |
RS422 RX- |
Serial Port Receive - |
From the upper computer to the rangefinder |
| 8 |
RS422 TX- |
Serial Port Transmit - |
From the rangefinder to the upper computer |
| 9 |
RS422 TX+ |
Serial Port Transmit + |
From the rangefinder to the upper computer |
APPLICATION NOTES
The LRF1830C uses a 1535 nm erbium-glass source in single-pulse time-of-flight operation to reach ≥18 km on a 4 m x 6 m target at 30% reflectance under visibility of ≥18 km, with ≥500 µJ laser energy, ≤0.3 mrad divergence, a Ø18 mm launch lens and a Ø60 mm receiver. Accuracy of ±2 m, a range resolution of ≤0.1 m and detection of up to three targets describe a module built for long-distance differential ranging rather than single-return measurement.
A minimum range of ≤50 m, a 0.5 Hz to 10 Hz ranging frequency, RS422 communication over a J30J connector, DC 12 V input with ≤1.2 W standby, ≤2 W average and ≤3 W peak, ≤400 g and a 125 x 100 x 70 mm envelope place it in vehicle, pod and fixed-site installations. Operation from -40 °C to +70 °C, storage from -55 °C to +75 °C, an accuracy rate of ≥98%, a false alarm rate of ≤1% and MIL-STD-810G impact testing match airborne and ground platform expectations.
SELECTION GUIDANCE
Select the LRF1830C where 18 km on a 4 m x 6 m target at 30% reflectance is the requirement and the 125 x 100 x 70 mm, ≤400 g envelope is available. Where 15 km is sufficient in a smaller 125 x 85 x 58.5 mm housing, the LRF1525C covers that case with the same Class Ⅰ eye safety, ±2 m accuracy and 0.5 Hz to 10 Hz rate; where the target set is smaller than 4 m x 6 m and a ≤65 g payload is the constraint, the 6 km and 8 km 1535 nm TOF sensors are the correct comparison.
At acceptance, verify ≥18 km on a 4 m x 6 m target at 30% reflectance and visibility ≥18 km, the ≤50 m minimum range, ±2 m accuracy, ≤0.1 m range resolution, the 0.5 Hz to 10 Hz rate, three-target detection, an accuracy rate of ≥98% with a false alarm rate of ≤1%, RS422 over the J30J connector, DC 12 V with ≤3 W peak, ≤400 g in 125 x 100 x 70 mm, and MIL-STD-810G impact qualification.
FREQUENTLY ASKED QUESTIONS
What is the maximum range of the LRF1830C?
It reaches ≥18 km on a 4 m × 6 m target, measured at 30% reflectance with visibility ≥18 km.
What are the ranging accuracy and minimum range of the LRF1830C?
Ranging accuracy is ±2 m with a range resolution of ≤0.1 m. The minimum range is ≤50 m.
How many targets can the LRF1830C detect at the same time?
It provides multi-target ranging capability for up to three targets.
Which communication interface and supply voltage does it use?
It communicates over RS422 through a J30J electrical connector and is powered from DC 12 V.
What is the ranging frequency, weight and size?
Ranging frequency is 0.5Hz~10Hz. The module weighs ≤400 g and measures 125mm×100mm×70mm.
ORDERING INFORMATION
Is there a minimum order quantity?
There is no minimum order quantity. Single units and evaluation samples are accepted.
What is the sample lead time?
Samples are shipped within 1 week after order confirmation.
What is the batch production lead time?
Batch production is delivered within 1 month after order confirmation.
RELATED TECHNICAL GUIDES
Further ERDI Laser engineering references on 1535 nm eye-safe laser ranging modules and TOF sensors: