Free shipping for orders more that $200
Free shipping for orders more that $200

Cart

Your cart is currently empty.

Continue shopping
1 / 4

1535nm Laser Ranging Module 3km LRF0105C

Chat With Us

Reply within 24 hours

Delivery Time

3-5 days after payment

Shipment

Air freight

DESCRIPTION

This 1535nm erbium glass laser rangefinder utilizes proprietary bonded crystal technology, achieving Class 1 eye-safe certification (ANSI/IEC 60825-1) with a ranging capability of ≥3000m for NATO standard targets (2.3m×2.3m).

TECHNICAL SPECIFICATIONS

Project Performance Indicators
Model LRF0105C
Laser Wavelength 1535±5nm
Eye- safety Class Ⅰ
Divergence Angle ≤1mrad
Laser Energy ≥100 μJ
Launch Lens Diameter Φ8 mm
Receiver Lens Diameter Φ20 mm
Measuring Range

(Reflectance 30%; visibility ≥ 5km.)

NATO objective(2.3m×2.3m) ≥3000m

Measuring human target(0.5m×1.7m) ≥1500m

Minimum Range ≤15 m
Ranging Frequency Single, 1Hz, 5Hz, 10Hz
Number of multi-target detections Up to 3 targets
Ranging Accuracy ±2 m
Range Resolution ≤0.1 m
Precision Rate ≥98%
False Alarm Rate ≤1%
Pin-in-lead package model FWF08002-S06B13W5M
Supply Voltage DC3~5 V
Standby power consumption ≤1mW
Average power consumption ≤0.8W
Peak Power Consumption ≤1.5W
Weight ≤29±1 g
Dimension (L×W×H) Φ34mm×47.5mm
Operating Temperature -40~+70 ℃
Storage Temperature -55~+75 ℃
Impact Resistance Meet the MIL-STD-810G testing standard
Vibration Resistance Meet the MIL-STD-810G testing standard

OUTLINE DIMENSION(mm)

PIN INTERFACE

  1. a) Power supply voltage: 3~5V;

The host computer realizes cross-linking test with the rangefinder through a 6PIN connector (FWF08002-S06B13W5M (Teska connector)). The pin definition of the communication port on the rangefinder is shown in the table.

Product electrical pin definition

Pin Identification number Definition of electrical characteristics Cable color  
P-1 COM Input power negative pole Power supply
P-2 VIN+ Input power positive pole
P-3 - (Empty)  
P-4 TTL_TXD Signal output port From rangefinder to host computer
P-5 TTL_RXD Signal input port From host computer to rangefinder
P-6 POWER_CTL Low power control port >0.7V to turn on, <0.15V to turn off

 

APPLICATION NOTES

The LRF0105C is a bonded-crystal 1535 ±5 nm erbium glass design at ≥100 μJ with ≤1 mrad divergence, a Φ8 mm launcher and a Φ20 mm receiver, delivering ≥3000 m on a NATO 2.3 m × 2.3 m target and ≥1500 m on a 0.5 m × 1.7 m human target at ±2 m accuracy and ≤0.1 m resolution, with up to 3 targets per shot, ≥98 % precision rate and ≤1 % false alarm rate. Single-shot plus 1 Hz, 5 Hz and 10 Hz repetition, a ≤15 m minimum range, and ≤1 mW standby, ≤0.8 W average and ≤1.5 W peak consumption make it suited to handheld, helmet-mounted and small-payload installations where the battery budget rather than the optical aperture is the binding constraint; the wider 1 mrad beam trades a little concentration for a more forgiving aim point at 3 km. The Φ34 mm × 47.5 mm, ≤29 ±1 g round body, TTL TX and RX pair and low-power control pin switched on above 0.7 V fit cylindrical sight housings, with MIL-STD-810G impact and vibration compliance stated.

SELECTION GUIDANCE

Choose this module where the supply is a small battery, the housing is cylindrical, and 3 km on NATO targets with 1.5 km on human targets covers the task, especially where a low duty cycle keeps heat generation low. Where ±1 m accuracy is required at the same range, the LRF0310C is the closer fit at the cost of a higher peak draw. Where 4 km is needed, the LRF0405C provides it at ±2 m with ≤0.6 mrad divergence from a 3 V to 5 V supply. Where compact fast ranging matters, the LRF0305C and LRF0306C offer ≤14 ±1 g with a ~7.4 mrad field of view. For 6 km and beyond, move to the LRF0612C or LRF0816C groups. At acceptance, verify wavelength tolerance and Class Ⅰ marking, energy ≥100 μJ, divergence ≤1 mrad, launcher and receiver diameters, the minimum range figure, both range figures at the stated reflectance and visibility, accuracy and resolution, precision and false alarm rates, standby, average and peak consumption, temperature limits, and the shock and vibration reports. Confirm the power control threshold and TTL TX and RX direction against the pin table.

FREQUENTLY ASKED QUESTIONS

How far can the LRF0105C laser rangefinder measure?
It delivers ≥3000m on a NATO standard target (2.3m×2.3m) and ≥1500m on a measuring human target (0.5m×1.7m).

What is the ranging accuracy of the LRF0105C?
Ranging accuracy is ±2m with a range resolution of ≤0.1m, and it meets Class I eye safety under ANSI/IEC 60825-1.

What are the weight and dimensions of the LRF0105C?
It weighs ≤29±1g and measures Φ34mm×47.5mm.

What supply voltage and power consumption does the LRF0105C have?
It runs on DC 3~5V with average power consumption of ≤0.8W and peak power consumption of ≤1.5W.

What ranging frequency settings does the LRF0105C offer?
It offers single-shot, 1Hz, 5Hz and 10Hz ranging modes with up to 3 targets detected.

ORDERING INFORMATION

Is there a minimum order quantity?
There is no minimum order quantity. Single units and evaluation samples are accepted.

What is the sample lead time?
Samples are shipped within 1 week after order confirmation.

What is the batch production lead time?
Batch production is delivered within 1 month after order confirmation.

RELATED TECHNICAL GUIDES

Further ERDI Laser engineering references on 1535 nm eye-safe laser ranging modules and TOF sensors:

1535NM Laser Ranging Module 3KM 1535NM Laser Ranging Module 3KM 1535NM Laser Ranging Module 3KM 1535NM Laser Ranging Module 3KM

You may also like