DESCRIPTION
The LRF0306C-02 laser ranging module represents the latest offering from ERDI Lasernology, characterized by a compact structure and streamlined form factor. Leveraging Time-of-Flight (TOF) technology, it delivers precise distance measurements across a range of 10 meters to 4000 meters. Additionally, the module supports a 3Hz ranging frequency and is equipped with a UART (TTL 3.3V) communication interface for seamless data transmission.
TECHNICAL SPECIFICATIONS
|
Laser Wavelength
|
1535±5nm
|
|
Eye- safety
|
Class Ⅰ (IEC 60825-1)
|
|
Divergence Angle
|
≤0.6 mrad
|
|
Laser Energy
|
≥100 μJ
|
|
Field of View (FOV)
|
~ 7. 4mrad
|
|
Maximum Measuring Range
(Visibility > 8km)
|
≥ 4000m @60% Reflectivity, Building Target
|
|
|
≥3000m @30% Reflectivity, 2.3×2.3m Target
|
|
|
≥1500m @30% Reflectivity, 0.5×1.7m Target
|
|
|
≥800m @30% Reflectivity, 0.2×0.3m Target
|
|
Minimum Range
|
≤10 m
|
|
Ranging Frequency
|
1Hz ~3Hz
|
|
Multi-Target Detection
|
Up to 3 targets
|
|
Ranging Accuracy
|
±1 m
|
|
Accuracy Rate
|
≥98%
|
|
False Alarm Rate
|
≤1%
|
|
Interface Type
|
UART(TTL 3.3V)
|
|
Power Supply Voltage
|
DC 3~5V
|
|
Standby Power Consumption
(Full Temperature Range)
|
≤10mW (Power on pulled low)
|
|
|
≤0.8W (Power on pulled high)
|
|
Operating Power Consumption
(Full Temperature Range)
|
5V.≤0.9W@1Hz
|
|
|
5V,<1. 1W@3Hz
|
|
Peak Power Consumption
|
≤3W
|
|
Start-up Time
|
≤350ms (After startup, response time ≤20ms)
|
|
Weight
|
≤ 14±1g
|
|
Dimensions
|
≤ 27×25×15.5mm(L×W×H)
|
|
Shock
|
1200g, 1ms
|
|
Vibration
|
5~50~5 Hz, 1 octave/min, 2.5g
|
|
Operating Temperature
|
-40 ~ +70℃
|
|
Storage Temperature
|
-45 ~ +70℃
|
|
Reliability
|
MTBF>1500h
|
OUTLINE DIMENSION(mm)

Recommended mounting bracket dimensions are as follows:

Installation Diagram:

PIN INTERFACE
|
Pin
|
Definition
|
Description
|
|
1
|
POWER_ON
|
Module Power Switch, TTL 3.3V Level;
Module On (>2.7V), Module Off (<0.3V)
|
|
2
|
UART_RX
|
Serial Port Receiver, TTL 3.3V Level
|
|
3
|
UART_TX
|
Serial Port Transmitter, TTL 3.3V Level
|
|
4
|
NC
|
|
|
5
|
Power Positive
|
Power Supply, 3~5V
|
|
6
|
GND
|
Serial Port Ground
|
APPLICATION NOTES
The LRF0306C uses the same 1535 ±5 nm, ≥100 μJ transmission chain as its 10 Hz sibling with ≤0.6 mrad divergence, a launcher-side aperture feeding the stated range ladder and an about 7.4 mrad field of view, but caps repetition at 1 Hz to 3 Hz and therefore runs cooler for the same optical performance. The ladder states ≥4000 m against a 60 % reflectance building target, ≥3000 m against a 2.3 m × 2.3 m target at 30 % reflectance, ≥1500 m against a 0.5 m × 1.7 m target and ≥800 m against a 0.2 m × 0.3 m target at visibility above 8 km, with ±1 m accuracy, ≥98 % accuracy rate, ≤1 % false alarm rate, up to 3 targets per shot and a ≤10 m minimum range. Consumption from a DC 3 V to 5 V rail is ≤10 mW on standby with power on pulled low, ≤0.9 W at 1 Hz and <1.1 W at 3 Hz, so the module is typically used where a 3 Hz cadence is enough and thermal headroom or battery life dominates. A ≤350 ms start-up with ≤20 ms response, 1200 g for 1 ms shock, 2.5 g vibration from 5 Hz to 50 Hz and MTBF above 1500 h support that role.
SELECTION GUIDANCE
Choose this variant where the update rate requirement is genuinely 3 Hz or less, the enclosure has little thermal margin, and the ≥800 m performance on a 0.2 m × 0.3 m target is the smallest object the mission must range. Where 10 Hz scanning or tracking is required instead, the LRF0305C uses the same optics and range ladder with a higher operating and peak draw. Where a wider receiver and 1.5 km human-target performance matter, the LRF0105C states ≤3000 m NATO and ≥1500 m human with ≤0.8 W average. Where 4 km standoff is needed, the LRF0405C provides it at ≤32 g. At acceptance, verify wavelength tolerance and Class Ⅰ classification, energy ≥100 μJ, divergence ≤0.6 mrad, field of view, minimum range, the full range ladder at the stated reflectances and visibility conditions, ±1 m accuracy and accuracy rate, false alarm rate, the 3 Hz repetition limit, standby and operating consumption across the full temperature range, start-up and response time, the shock and vibration ratings, and the MTBF statement. Confirm the connector pin-out and the 3 V to 5 V rail limits, then run a thermal soak at the upper operating temperature before fielding.
FREQUENTLY ASKED QUESTIONS
What range can the LRF0306C laser ranging module achieve?
At visibility >8km it reaches ≥4000m on a building target (60% reflectivity), ≥3000m on a 2.3m×2.3m target, ≥1500m on a 0.5m×1.7m target and ≥800m on a 0.2m×0.3m target at 30% reflectivity.
What are the weight and dimensions of the LRF0306C?
It weighs ≤14±1g and measures ≤27mm×25mm×15.5mm (L×W×H).
How fast does the LRF0306C start up?
Start-up time is ≤350ms, with a response time of ≤20ms after startup.
What is the power consumption of the LRF0306C?
It runs on a DC 3~5V supply with standby consumption of ≤10mW (power on pulled low) or ≤0.8W (pulled high), operating consumption of ≤0.9W@1Hz and <1.1W@3Hz at 5V, and peak consumption of ≤3W.
What is the field of view and ranging accuracy of the LRF0306C?
It has a field of view of ~7.4mrad and a ranging accuracy of ±1m with a false alarm rate of ≤1%.
ORDERING INFORMATION
Is there a minimum order quantity?
There is no minimum order quantity. Single units and evaluation samples are accepted.
What is the sample lead time?
Samples are shipped within 1 week after order confirmation.
What is the batch production lead time?
Batch production is delivered within 1 month after order confirmation.
RELATED TECHNICAL GUIDES
Further ERDI Laser engineering references on 1535 nm eye-safe laser ranging modules and TOF sensors: