DESCRIPTION
The LRF0405C-02 is a Class 1 eye-safe laser ranging module featuring a 200μJ 1535nm erbium glass microchip laser, It delivers a ranging capability ≥4000m for NATO standard targets (2.3m×2.3m) and operates within -40℃~+65℃ extremes.
TECHNICAL SPECIFICATIONS
| Project |
Performance Indicators |
| Model |
LRF0405C |
| Laser Wavelength |
1535±5nm |
| Eye- safety |
Class Ⅰ |
| Divergence Angle |
≤0.6 mrad |
| Laser Energy |
≥200 μJ |
| Launch Lens Diameter |
Φ8 mm |
| Receiver Lens Diameter |
Φ16 mm |
| Measuring Range
(Reflectance 30%; visibility ≥ 5km.)
|
NATO objective(2.3m×2.3m) ≥4000m
Measuring human target(0.5m×1.7m) ≥1200m
|
| Minimum Range |
≤15 m |
| Ranging Frequency |
Single, 1Hz ~10Hz |
| Number of multi-target detections |
Up to 3 targets |
| Ranging Accuracy |
±2 m |
| Range Resolution |
≤0.1 m |
| Precision Rate |
≥98% |
| False Alarm Rate |
≤1% |
| Pin-in-lead package model |
FWF08002-S06B13W5M |
| Supply Voltage |
DC3~5 V |
| Standby power consumption |
≤1 mW |
| Average power consumption |
≤2.5 W @10 Hz |
| Peak Power Consumption |
≤7 W @12 V |
| Weight |
≤32±1 g |
| Dimension (L×W×H) |
48mm×30.5mm×21 mm |
| Operating Temperature |
-40~+70 ℃ |
| Storage Temperature |
-55~+75 ℃ |
| Impact Resistance |
Meet the MIL-STD-810G testing standard |
| Vibration Resistance |
Meet the MIL-STD-810G testing standard |
OUTLINE DIMENSION(mm)

PIN INTERFACE
User Electrical interface: UART(TTL_3.3V)
The connector model of electrical interface is A1257WR-S-6P, and the specific wiring definition is shown in the table below.

| Pin |
Definition |
Description |
Cable color |
| 1 |
Positive power supply |
Power supply, 4.5 ~ 16V |
Red |
| 2 |
Negative power supply |
Power supply, ground |
Black |
| 3 |
POWER_ON |
Module power switch, TTL_ 3.3V level;
Module on (> 2.7V), module off (< 0.3V);
|
White |
| 4 |
UART_TX |
Serial port sender, TTL_ 3.3V level |
Yellow |
| 5 |
UART_RX |
Serial port receiver, TTL_ 3.3V level |
Green |
APPLICATION NOTES
At ≤32 ±1 g and 48 × 30.5 × 21 mm with a DC 3 V to 5 V input and ≤1 mW standby, the LRF0405C is the compact eye-safe option in this series: a 200 μJ 1535 ±5 nm microchip laser behind a Φ8 mm launcher and Φ16 mm receiver with ≤0.6 mrad divergence, reaching ≥4000 m on a NATO 2.3 m × 2.3 m target at 30 % reflectance and ≥1200 m on a 0.5 m × 1.7 m human target, at ±2 m accuracy with ≤0.1 m resolution, ≥98 % precision rate, ≤1 % false alarm rate and up to 3 targets over single-shot and 1 Hz to 10 Hz operation. A ≤15 m minimum range with ≤2.5 W average at 10 Hz and ≤7 W peak makes it suited to handheld observation units, small gimbals and short-range profiling tasks where the aperture must stay small and the supply is a battery pack rather than a 12 V rail. −40 °C to +70 °C operation and MIL-STD-810G impact and vibration compliance cover the shock and thermal screening in our reliability validation notes, consistent with our lightweight eye-safe ranging solution material.
SELECTION GUIDANCE
Choose this module where 4 km NATO-target and 1.2 km human-target standoff is enough, the rail is 3 V to 5 V, and roughly 32 g of opto-mechanics is the mass ceiling. Where tighter accuracy is the deciding factor on shorter ranges, the LRF0310C offers ±1 m at ≥3000 m in the same 48 × 30.5 × 21 mm, ≤32 ±1 g housing with single-pulse ranging. Where consumption must be minimised, the LRF0105C quotes ≤0.8 W average and ≤1.5 W peak with ≤3000 m NATO and ≥1500 m human target performance. Where scanning speed is required, the 14 g LRF0305C reaches 1 Hz to 10 Hz from ≤10 m. Where 6 km to 12 km is needed, move to the LRF0612C, LRF1017C or LRF1222C groups and accept a 12 V supply and larger apertures. At acceptance, verify wavelength tolerance and Class Ⅰ marking, energy ≥200 μJ, divergence ≤0.6 mrad, aperture diameters, minimum range, both range figures at the stated reflectance and visibility, accuracy, precision and false alarm rates, standby, average and peak consumption, temperature limits, and the shock and vibration reports.
FREQUENTLY ASKED QUESTIONS
How far can the LRF0405C laser ranging module measure?
It delivers ≥4000m on a NATO standard target (2.3m×2.3m) and ≥1200m on a measuring human target (0.5m×1.7m).
What is the minimum range and ranging frequency of the LRF0405C?
The minimum range is ≤15m and it offers single-shot plus 1Hz~10Hz ranging, with up to 3 targets detected.
What are the weight and dimensions of the LRF0405C?
It weighs ≤32±1g and measures 48mm×30.5mm×21mm (L×W×H).
What laser energy and divergence angle does the LRF0405C use?
It provides ≥200μJ laser energy at 1535±5nm with a divergence angle of ≤0.6mrad.
What supply voltage and interface does the LRF0405C require?
It operates on a DC 3~5V supply through a UART (TTL_3.3V) interface.
ORDERING INFORMATION
Is there a minimum order quantity?
There is no minimum order quantity. Single units and evaluation samples are accepted.
What is the sample lead time?
Samples are shipped within 1 week after order confirmation.
What is the batch production lead time?
Batch production is delivered within 1 month after order confirmation.
RELATED TECHNICAL GUIDES
Further ERDI Laser engineering references on 1535 nm eye-safe laser ranging modules and TOF sensors: