DESCRIPTION
The LRF0612C-02 is a Class 1 eye-safe laser ranging module featuring a 200μJ 1535nm erbium glass microchip laser, compliant with ANSI/IEC 60825-1 safety standards. It achieves a ranging capability of ≥6000m for NATO standard targets (2.3m×2.3m) and operates within -40℃~+65℃ extremes. It has the advantage of small size and can maintain extremely high stability in extreme environments.
TECHNICAL SPECIFICATIONS
| Project |
Performance Indicators |
| Model |
LRF0612C |
| Laser Wavelength |
1535±5nm |
| Eye- safety |
Class Ⅰ |
| Divergence Angle |
≤0.3 mrad |
| Laser Energy |
≥200 μJ |
| Launch Lens Diameter |
Φ12 mm |
| Receiver Lens Diameter |
Φ25 mm |
| Measuring Range
(Reflectance 30%; visibility ≥ 8 km.)
|
NATO objective(2.3m×2.3m) ≥6000m
Measuring human target(0.5m×1.7m) ≥1200m
|
| Minimum Range |
≤50 m |
| Ranging Frequency |
1Hz ~10Hz |
| Number of multi-target detections |
Up to 3 targets |
| Ranging Accuracy |
±2 m |
| Range Resolution |
≤0.1m |
| Precision Rate |
≥98% |
| False Alarm Rate |
≤1% |
| Pin-in-lead package model |
A1257WR-S-6P |
| Supply Voltage |
DC 4.5~16 V |
| Standby power consumption |
≤1 mW |
| Average power consumption |
≤4 W @ |
| Peak Power Consumption |
≤14W @12 V |
| Weight |
≤ 58±1g |
| Dimension (L×W×H) |
65mm×48mm×32 mm |
| Operating Temperature |
-40~+70 ℃ |
| Storage Temperature |
-55~+75 ℃ |
| Impact Resistance |
Meet the MIL-STD-810G testing standard |
| Vibration Resistance |
Meet the MIL-STD-810G testing standard |
OUTLINE DIMENSION(mm)
The overall dimension of the ranging module and the user installation interface are shown in the figure below.

PIN INTERFACE
User electrical interface:UART,TTL_ 3.3V
The connector model of electrical interface is A1257WR-S-6P, and the specific wiring definition is shown in the table below.

| Pin |
Definition |
Description |
Cable color |
| 1 |
Positive power supply |
Power supply, 4.5 ~ 16V |
Red |
| 2 |
Negative power supply |
Power supply, ground |
Black |
| 3 |
POWER_ON |
Module power switch, TTL_ 3.3V level;
Module on (> 2.7V), module off (< 0.3V);
|
White |
| 4 |
UART_TX |
Serial port sender, TTL_ 3.3V level |
Yellow |
| 5 |
UART_RX |
Serial port receiver, TTL_ 3.3V level |
Green |
APPLICATION NOTES
Built around a 200 μJ 1535 ±5 nm erbium glass microchip laser with ≤0.3 mrad divergence, the LRF0612C pairs a Φ12 mm launcher with a Φ25 mm receiver to reach ≥6000 m on a NATO 2.3 m × 2.3 m target at 30 % reflectance with visibility ≥8 km, and ≥1200 m on a 0.5 m × 1.7 m human target. Accuracy is ±2 m with ≤0.1 m resolution, ≥98 % precision rate, ≤1 % false alarm rate, 1 Hz to 10 Hz repetition and up to 3 targets per shot, all inside a 65 × 48 × 32 mm, ≤58 ±1 g housing. The 4.5 V to 16 V input, ≤1 mW standby, ≤4 W average and ≤14 W peak at 12 V suit unregulated UAV and vehicle rails, and the six-pin A1257WR-S-6P lead set with UART TTL 3.3 V, a POWER_ON line switched above 2.7 V and off below 0.3 V, and the colour-coded leads simplify harness assembly inside an existing airframe. −40 °C to +70 °C operation with −55 °C to +75 °C storage and MIL-STD-810G shock and vibration compliance match the environmental screening set out in our laser module reliability validation notes.
SELECTION GUIDANCE
Select this module where a 6 km NATO-target channel and 1.2 km human-target channel are required in a form factor of about 58 g that draws under 1 mW on standby from an unregulated rail. Where 8 km is needed in the same envelope, the LRF0816C provides it with ≥300 μJ and the same supply range; where a five-pin Molex harness is already standard on the platform, the LRF0610C is the documented alternative in the same power class. Where close-in targets or a differential serial link matter, the LRF0815C with a Φ40 mm receiver and ≤15 m minimum range fits better. Where less mass is decisive, the LRF0405C at ≤32 g or the LRF0305C at ≤14 ±1 g cover 4 km and 3 km. At acceptance, verify wavelength tolerance and Class Ⅰ marking, energy ≥200 μJ, divergence ≤0.3 mrad, launcher and receiver diameters, minimum range, both range figures at the stated reflectance and visibility, accuracy and resolution, precision and false alarm rates, standby, average and peak consumption, temperature limits, and the shock and vibration reports.
FREQUENTLY ASKED QUESTIONS
How far can the LRF0612C laser ranging module measure?
It achieves ≥6000m on a NATO standard target (2.3m×2.3m) and ≥1200m on a measuring human target (0.5m×1.7m), with a minimum range of ≤50m.
What type of laser does the LRF0612C use?
It uses a ≥200μJ 1535nm erbium glass microchip laser with ≤0.3mrad divergence.
What is the ranging accuracy and range resolution of the LRF0612C?
Ranging accuracy is ±2m with a range resolution of ≤0.1m, a precision rate of ≥98% and a false alarm rate of ≤1%.
What are the weight and dimensions of the LRF0612C?
It weighs ≤58±1g and measures 65mm×48mm×32mm (L×W×H).
What supply voltage and interface does the LRF0612C require?
It runs on DC 4.5~16V through a UART TTL_3.3V interface and an A1257WR-S-6P connector, with a ranging frequency of 1Hz~10Hz.
ORDERING INFORMATION
Is there a minimum order quantity?
There is no minimum order quantity. Single units and evaluation samples are accepted.
What is the sample lead time?
Samples are shipped within 1 week after order confirmation.
What is the batch production lead time?
Batch production is delivered within 1 month after order confirmation.
RELATED TECHNICAL GUIDES
Further ERDI Laser engineering references on 1535 nm eye-safe laser ranging modules and TOF sensors: