Free shipping for orders more that $200
Free shipping for orders more that $200

Cart

Your cart is currently empty.

Continue shopping
1 / 4

905nm Laser Rangefinder Module 2km

Chat With Us

Reply within 24 hours

Delivery Time

3-5 days after payment

Shipment

Air freight

DESCRIPTION

Leveraging Time-of-Flight (TOF) technology, this 905nm laser ranging module realizes high-precision distance measurement through calculating the round-trip travel time of laser beams. It offers a measurement range spanning 5 to 2000 meters and comes equipped with a UART (TTL_3.3V) interface, supporting both single-shot and continuous ranging functions.

TECHNICAL SPECIFICATIONS

Performance Indicators

Eye safety class

Class 1(IEC 60825-1)

Laser wavelength

905±10nm

Laser divergence angle (typical)

3×6mrad

Average laser power

8.43mW

Laser pulse width

40ns

Receiver field of view

~8mrad

Maximum range

(Visibility ≥ 6Km)

≥2000m @70% reflectivity, building targets

Minimum range

5m

Ranging accuracy

(Construction target)

d≤200m:±0.7m

d>200m:±(0.7+0.0004*d)m (d represents distance, in meters)

Measurement frequency

1~3Hz

Accuracy rate

≥98%

False alarm rate

≤1%

Electrical Specifications

Baud rate

15200bps (factory setting)/57600bps/38400bps/9600bps

Interface type

UART(TTL_3.3V)

Supply voltage

DC 3.3±0.1V

Standby power consumption

≤0.5mW (Power on pulled low)

≤0.35W (Power on pulled high)

Operating power consumption

(+3.3Vin)

≤1.5W@25℃

≤1.75W@70℃

≤1.38W@-20℃

Startup time

≤550ms

Physical characteristics

Weight

11±0.5g

Dimensions

26×25×14.5mm(L×W×H)

Shock

1200g,1ms

Vibration

5~50~5 Hz, 1 octave/min, 2.5g

Environmental adaptability

Operating temperature

-20~+70℃

Storage temperature

-25~+75℃

Reliability

MTBF≥1500h

Note: Visibility refers to visibility in fog and haze weather, and the impact is greater in sandstorm weather.

OUTLINE DIMENSION(mm)

Mechanical Interface and Center of Mass Position

Structural Installation

The recommended dimensions of the mounting bracket are as follows:

Installation Diagram:

The thread length of the countersunk head screw must not exceed 3.5mm.

PIN INTERFACE

Interface Definition

Interface Type: UART (TTL_3.3V)Connector Model: HC-0.8-6PWT

Pin

Definition

Description

Color

 

1

GND

Ground wire

Green

2

Power Supply

3.3V DC power supply

Yellow

3

NC

No connection (NC)

Orange

4

TTL_TXD

Serial port transmitter, TTL_3.3V level

Red

5

TTL_RXD

Serial port receiver, TTL_3.3V level

Brown

6

Enable Pin

Low level to power on

Black

 

APPLICATION NOTES

This module measures 5 m to ≥2000 m against building targets of 70% reflectivity at visibility of ≥6 km, with ±0.7 m accuracy to 200 m and ±(0.7 + 0.0004 x d) m beyond, at 1~3 Hz. Class 1 to IEC 60825-1, 3 x 6 mrad divergence, an ~8 mrad receiver field of view, 8.43 mW average laser power and a 40 ns pulse give a narrow single-target measurement suited to handheld observation units, small UAV payloads and other platforms fed from a 3.3 ± 0.1 V rail.

At 11 ± 0.5 g in 26 x 25 x 14.5 mm, with ≤0.5 mW standby when the enable is pulled low, ≤1.5 W operation at 25 °C and ≤550 ms startup, it is typically used where the module sleeps between interrogations and a deliberate 1~3 Hz cadence is acceptable. Shock of 1200 g for 1 ms, 2.5 g vibration, -20 °C to +70 °C operation and MTBF ≥1500 h fit outdoor airborne and vehicle payload duty, while an accuracy rate of ≥98% and a false alarm rate of ≤1% describe how often the reported distance can be trusted.

SELECTION GUIDANCE

Select this module where a 2 km standoff on 70% building targets, a 3.3 V single supply and 11 g of payload are the binding constraints. If 1.5 km or 1 km covers the scene, the shorter members of the same 905 nm family keep the 3.3 V rail and the 1~3 Hz cadence, and the 1 km unit additionally accepts 3.3~5 V at ≤0.85 W; where Class 1 operation must hold at longer standoff or among people, 1535 nm modules are the class to evaluate.

At acceptance, verify that ≥2000 m is demonstrated under the stated visibility ≥6 km and 70% reflectivity conditions, the 5 m minimum range, the accuracy formula on both sides of 200 m, an accuracy rate of ≥98% with a false alarm rate of ≤1%, 1~3 Hz measurement frequency, ≤550 ms startup, ≤0.5 mW standby and ≤1.5 W operation at 25 °C, UART at the configured baud rate from 9600 to 57600 bps, and MTBF ≥1500 h with the 1200 g, 1 ms shock rating.

FREQUENTLY ASKED QUESTIONS

What is the maximum ranging distance of the 905nm Laser Rangefinder Module 2km?
The specified maximum range is ≥2000 m at 70% reflectivity against building targets, with visibility ≥6 km. The minimum range is 5 m.

What ranging accuracy does this 2 km 905nm module achieve?
For targets at d≤200 m the accuracy is ±0.7 m, and for d>200 m it is ±(0.7+0.0004*d) m, where d is the distance in meters.

Which interface, baud rate and supply voltage does the 2 km module use?
It uses a UART (TTL_3.3V) interface on the HC-0.8-6PWT connector, with 15200bps as the factory setting and 57600bps, 38400bps or 9600bps also available. Supply voltage is DC 3.3±0.1 V.

What is the measurement frequency and how reliable are the readings?
Measurement frequency is 1~3 Hz, with an accuracy rate of ≥98% and a false alarm rate of ≤1%. Startup time is ≤550 ms.

What are the weight and dimensions of the module?
The module weighs 11±0.5 g and measures 26×25×14.5 mm (L×W×H).

ORDERING INFORMATION

Is there a minimum order quantity?
There is no minimum order quantity. Single units and evaluation samples are accepted.

What is the sample lead time?
Samples are shipped within 1 week after order confirmation.

What is the batch production lead time?
Batch production is delivered within 1 month after order confirmation.

RELATED TECHNICAL GUIDES

Further ERDI Laser engineering references on 905 nm compact laser rangefinder modules:

905nm Laser Rangefinder Module 2km 905nm Laser Rangefinder Module 2km 905nm Laser Rangefinder Module 2km 905nm Laser Rangefinder Module 2km

You may also like