Free shipping for orders more that $200
Free shipping for orders more that $200

Cart

Your cart is currently empty.

Continue shopping
1 / 4

905nm LRF200H LiDAR 200m

Chat With Us

Reply within 24 hours

Delivery Time

3-5 days after payment

Shipment

Air freight

DESCRIPTION

LRF200H-02 is a mid-to-long-range LiDAR module that adopts 905nm laser technology and Time-of-Flight (ToF) principles to realize high-precision distance measurement. Engineered with strong resistance to intense electromagnetic interference, it is compatible with a wide range of indoor and outdoor use cases—such as positioning and collision avoidance monitoring for land transport vehicles and overhead bridge cranes. Boasting an extensive measurement range and high accuracy, this module integrates smoothly into real-time data acquisition systems through standard interfaces (e.g., UART), while supporting both single-shot and continuous ranging modes. Its compact structure and low power consumption make it a dependable perception solution for autonomous systems, industrial automation, and intelligent transportation scenarios.

TECHNICAL SPECIFICATIONS

Category

Specification

Model

LRF200H

Range

0.05m~200m (90%reflectivity), 0.05m~70m (10%reflectivity)

Frequency

20Hz~10KHz (Default: 1KHz)

Accuracy

±10cm (<10m), 1% (≥10m)

Repeatability

±5cm (<10m), ±10cm@200m

Ambient Light Immunity

100KLux

Central Wavelength

905nm

Photobiological Safety

Class1

FOV

about 4mrad

Wavelength for Indication

N/A

Photobiological Safety for Indication

N/A

Supply Voltage

9~36VDC

Peak Current

100mA

Average Current

30mA

Average Power Consumption

0.7W

Communication Interface

UART,IIC

Protection Level

N/A

Dimension

33 x 34 x 18 mm

Weight

20±2g

Operating Temperature

-20℃ ~ +60℃

Wire Specification

1.25mm, 5P 50cm stranded wires

Customization

available in appearance / structure / output protocol

OUTLINE DIMENSION(mm)

PIN INTERFACE

No.

Definition / Wire Color

User Interface

1

9-36V (Red)

External Power +

2

Power GND (Black)

External Power -

3

Port GND (Yellow)

GND

4

TX (Green)

RX

5

RX (Blue)

TX

 

APPLICATION NOTES

The LRF200H measures 0.05–200 m on 90% reflectivity targets and 0.05–70 m on 10% reflectivity targets with a 905 nm Class 1 source, a repetition rate adjustable from 20 Hz to 10 kHz (1 kHz default, single-shot or continuous ranging) and an approximately 4 mrad field of view. Its specification calls out resistance to intense electromagnetic interference, so it is typically used where drives, contactors or crane motors share the electrical environment with the sensor, and where 100 KLux ambient light immunity is needed indoors and outdoors.

At 0.7 W average power, 30 mA average current, 20 ± 2 g and a 33 x 34 x 18 mm housing fed from 9~36 VDC, the module is suited to AGV/AMR and warehousing positioning, collision avoidance monitoring of land transport vehicles and overhead bridge cranes, and industrial automation points wired from a 9~36 VDC rail. Accuracy of ±10 cm below 10 m and 1% at and beyond 10 m, with ±10 cm repeatability at 200 m, defines the band in which the reading is used for positioning rather than metrology.

SELECTION GUIDANCE

Select the LRF200H where 200 m on co-operative targets, a 10 kHz ceiling and electromagnetic robustness are needed together and 0.7 W is affordable. Where a shorter envelope covers the task, the 100 m member of the same family keeps 0.7 W and the 33 x 34 x 18 mm outline; where targets beyond 200 m must be reached, the 300 m member trades 1.2 W average power for the extra range; where a visible aiming reference is wanted during installation, the 50 m member carries an integrated coaxial aiming light.

At acceptance, verify 200 m at 90% and 70 m at 10% reflectivity, the accuracy split at 10 m, repeatability of ±10 cm at 200 m, the 20 Hz to 10 kHz range with its 1 kHz default, both single-shot and continuous modes, 100 KLux immunity, 0.7 W and 30 mA at the stated input, UART and IIC operation, and -20 °C to +60 °C operation at 20 ± 2 g.

FREQUENTLY ASKED QUESTIONS

What is the measuring range of the LRF200H?
It measures 0.05m~200m at 90% reflectivity and 0.05m~70m at 10% reflectivity.

What accuracy and repeatability does the LRF200H provide?
Accuracy is ±10cm (<10m) and 1% (≥10m), with repeatability of ±5cm (<10m) and ±10cm@200m.

What measurement frequency does the LRF200H support?
Its frequency is 20Hz~10KHz with a default of 1KHz, and it supports both single-shot and continuous ranging modes.

What supply voltage, power consumption and interface does the LRF200H need?
It operates on 9~36VDC with an average current of 30mA and average power consumption of 0.7W, and communicates over UART,IIC.

What are the dimensions and weight of the LRF200H?
The module measures 33 x 34 x 18 mm and weighs 20±2g, with an ambient light immunity of 100KLux and an operating temperature of -20℃~+60℃.

ORDERING INFORMATION

Is there a minimum order quantity?
There is no minimum order quantity. Single units and evaluation samples are accepted.

What is the sample lead time?
Samples are shipped within 1 week after order confirmation.

What is the batch production lead time?
Batch production is delivered within 1 month after order confirmation.

RELATED TECHNICAL GUIDES

Further ERDI Laser engineering references on 905 nm short-range LiDAR and ranging sensors:

905nm LRF200H LiDAR 200m 905nm LRF200H LiDAR 200m 905nm LRF200H LiDAR 200m 905nm LRF200H LiDAR 200m

You may also like