Free shipping for orders more that $200
Free shipping for orders more that $200

Cart

Your cart is currently empty.

Continue shopping
1 / 4

905nm LRF600H LiDAR 600m

Chat With Us

Reply within 24 hours

Delivery Time

3-5 days after payment

Shipment

Air freight

DESCRIPTION

LRF600H-02 is a medium-to-long-range laser radar ranging module based on 905nm laser technology, featuring high precision, compact size, and a wide measurement range. It can measure distances from 0.05 ~ 600m with an accuracy of ±10cm. Its compact design (approximately 33 x 34 x 18mm in size and weighing 20g) makes it easy to integrate into various devices. With its small size, it can be integrated into many fields.

TECHNICAL SPECIFICATIONS

#

Model

LRF600H

1

Range

0.05m~600m (90%reflectivity), 0.05m~200m (10%reflectivity)

2

Frequency

1KHz or 50Hz (Switch automatically to match the intensity of reflected signals)

3

Accuracy

±10cm (<10m), 1% (≥10m)

4

Repeatability

±5cm (<10m), ±50cm@600m

5

Ambient Light Immunity

100KLux

6

Central Wavelength

905nm

7

Photobiological Safety

Class1

8

FOV

about 4mrad

9

Wavelength for Indication

N/A

10

Photobiological Safety for Indication

N/A

11

Supply Voltage

9~36VDC

12

Peak Current

100mA

13

Average Current

55mA

14

Average Power Consumption

1.2W

15

Communication Interface

UART/IIC

16

Protection Level

N/A

17

Dimension

33 x 34 x 18mm

18

Weight

20±2g

19

Operating Temperature

-20℃~+60℃

20

Wire Specification

1.25mm,5P 50cm stranded wires

21

Customization

available in appearance / structure / output protocol

OUTLINE DIMENSION(mm)

PIN INTERFACE

No.

Definition / Wire Color

User Interface

1

9-36V (Red)

External Power +

2

Power GND (Black)

External Power -

3

Port GND (Yellow)

GND

4

TX (Green)

RX

5

RX (Blue)

TX

 

APPLICATION NOTES

The LRF600H measures 0.05 m–600 m against 90% reflectivity targets and 0.05 m–200 m against 10% reflectivity targets, with ±10 cm accuracy below 10 m and 1% accuracy at or above 10 m, supported by repeatability of ±5 cm below 10 m and ±50 cm at 600 m. Those figures suit short-to-medium stand-off where sub-metre resolution at close range matters more than extreme reach: docking, stand-off clearance, height above ground and obstacle distance all fall inside the published envelope, and the 100 KLux ambient light immunity keeps the return usable in daylight.

At 33 × 34 × 18 mm and 20 ± 2 g on a 9–36 VDC input drawing 55 mA average and 1.2 W, with UART/IIC output over 1.25 mm 5P 50 cm stranded leads and Class 1 photobiological safety, the module is typically used where it must be embedded without changing an existing payload budget — including the UAV, pod and industrial automation platforms described in the site's low-altitude economy and short-range LiDAR application topics. A 1 kHz or 50 Hz rate that switches automatically to match reflected signal strength, FOV of about 4 mrad and operation from −20 °C to +60 °C complete the profile; customization is available in appearance, structure and output protocol.

SELECTION GUIDANCE

Select the LRF600H when the measurement task is bounded at 600 m or less and the priority is repeatable close-range accuracy — ±5 cm below 10 m and ±50 cm at 600 m — in a 20 g, 33 × 34 × 18 mm package. If any scenario genuinely requires measurement beyond 600 m on cooperative targets, the longer-range variant in this 905 nm family, which keeps the same interface, supply range, current draw and outline, should be specified instead; choosing it removes the range constraint at the cost of looser repeatability at its own far limit. Where a defined protection rating is a procurement requirement, note that none is published for this module and sealing must be handled by the host.

Acceptance checks: 0.05–600 m on 90% reflectivity targets, 0.05–200 m on 10% reflectivity targets, ±10 cm below 10 m and 1% above, repeatability ±5 cm below 10 m and ±50 cm at 600 m, both the 1 kHz and 50 Hz rates with automatic strength-based switching, 100 KLux ambient light immunity, Class 1 photobiological safety, FOV about 4 mrad, 55 mA average current and 1.2 W average consumption over 9–36 VDC, 20 ± 2 g, and −20 °C to +60 °C operation. Confirm the wire specification delivered and any customization of appearance, structure or output protocol.

FREQUENTLY ASKED QUESTIONS

What is the measuring range of the LRF600H?
It measures 0.05m~600m at 90% reflectivity and 0.05m~200m at 10% reflectivity.

What accuracy and repeatability does the LRF600H provide?
Accuracy is ±10cm (<10m) and 1% (≥10m), while repeatability is ±5cm (<10m) and ±50cm@600m.

What is the measurement frequency of the LRF600H?
It runs at 1KHz or 50Hz, switching automatically to match the intensity of reflected signals.

What supply voltage, power consumption and interface does the LRF600H require?
It operates on 9~36VDC with an average current of 55mA and average power consumption of 1.2W, and communicates over UART/IIC.

What are the dimensions and weight of the LRF600H?
The module measures 33 x 34 x 18mm and weighs 20±2g, with an ambient light immunity of 100KLux and an operating temperature of -20℃~+60℃.

ORDERING INFORMATION

Is there a minimum order quantity?
There is no minimum order quantity. Single units and evaluation samples are accepted.

What is the sample lead time?
Samples are shipped within 1 week after order confirmation.

What is the batch production lead time?
Batch production is delivered within 1 month after order confirmation.

RELATED TECHNICAL GUIDES

Further ERDI Laser engineering references on 905 nm short-range LiDAR and ranging sensors:

905nm LRF600H  LiDAR 600m 905nm LRF600H  LiDAR 600m 905nm LRF600H  LiDAR 600m 905nm LRF600H  LiDAR 600m

You may also like