DESCRIPTION
The LRF10VB-02 LiDAR represents a newly developed laser ranging solution rolled out by our company, tailored for applications including camera focusing, security surveillance, and squat detection. Built on the DTOF ranging principle, this product boasts a compact size, cost-effectiveness, outstanding performance, and robust resistance to ambient light interference—positioning it as an upgraded replacement for use in relevant fields. It employs the UART interface to transmit distance data, enabling straightforward operation, flexible mounting, and hassle-free expansion.
TECHNICAL SPECIFICATIONS
|
#
|
Model
|
LRF10VB
|
|
1
|
Range
|
0.05m~9m (90%reflectivity),
0.05m~5m (10%reflectivity)
|
|
2
|
Frequency
|
50Hz
|
|
3
|
Accuracy
|
±5cm (<5m), 1% (≥5m)
|
|
4
|
Repeatability
|
±10mm
|
|
5
|
Ambient Light Immunity
|
2m@70KLux2
|
|
6
|
Central Wavelength
|
940nm
|
|
7
|
Photobiological Safety
|
Class1
|
|
8
|
FOV
|
3°
|
|
9
|
Wavelength for Indication
|
N/A
|
|
10
|
Photobiological Safety for Indication
|
N/A
|
|
11
|
Supply Voltage
|
4.5~5.5VDC
|
|
12
|
Peak Current
|
5V@4.5mA
|
|
13
|
Average Current
|
5V@4mA
|
|
14
|
Average Power Consumption
|
<0.1W(Supports low power mode)
|
|
15
|
Communication Interface
|
UART
|
|
16
|
Protection Level
|
N/A
|
|
17
|
Dimension
|
12 x 7.5 x 9.1mm
|
|
18
|
Weight
|
1g
|
|
19
|
Operating Temperature
|
-20℃~ +60℃
|
|
20
|
Wire Specification
|
4pin 1.25mm terminal, 10cm tinned stranded wires
|
|
21
|
Customization
|
available in appearance / structure / output protocol
|
(Note: 1. This parameter was measured at 25°C in an indoor environment.
2. This parameter was measured with a 90% reflector in an outdoor environment at 25°C.)
OUTLINE DIMENSION(mm)

PIN INTERFACE
 |
|
No.
|
Definition / Wire Color
|
User Interface
|
|
1
|
TX
|
RX
|
|
2
|
RX
|
TX
|
|
3
|
GND
|
External Power -
|
|
4
|
5V
|
External Power +
|
APPLICATION NOTES
The LRF10VB is a direct time-of-flight single-point module covering 0.05–9 m on 90% reflectivity targets and 0.05–5 m on 10% reflectivity targets, and it is specified at 940 nm rather than 905 nm, at Class 1, with a 3 deg field of view and a 50 Hz output rate. Below 0.1 W average power with a low power mode, 5 V at 4.5 mA peak and 4 mA average, 1 g in a 12 x 7.5 x 9.1 mm outline, it is suited to camera focusing, security surveillance and squat detection.
Repeatability of ±10 mm at this range is what makes the module usable as a trigger sensor inside a camera or a fixed surveillance head, where the decision is a threshold crossing rather than a surveyed coordinate, and the UART output keeps the host connection simple. Ambient light immunity of 2 m at 70 KLux shows that the envelope contracts quickly in bright conditions, so it is typically used where the target sits inside a controlled or shaded field of view.
SELECTION GUIDANCE
Select the LRF10VB where the 9 m envelope, 1 g mass and sub-0.1 W draw define the design, and confirm that a 940 nm source suits the host optics and filters. If 20 m or 50 m of reach is needed, the LRF22VB and LRF50VB extend the envelope at 905 nm within the same single-point class; if 905 nm is mandatory at this short range, the LRF22VB is the closer match; where repeatability at distance rather than presence detection is the goal, the 905 nm LiDAR family is the right comparison.
At acceptance, verify 9 m at 90% and 5 m at 10% reflectivity, the 2 m at 70 KLux immunity figure, ±10 mm repeatability, accuracy of ±5 cm below 5 m and 1% at and beyond 5 m, the 50 Hz rate, the 4.5~5.5 VDC input at 4.5 mA peak and 4 mA average, power below 0.1 W with the low power mode enabled, the 940 nm wavelength, and the 1 g mass.
FREQUENTLY ASKED QUESTIONS
What is the measuring range of the LRF10VB?
It measures 0.05m~9m at 90% reflectivity and 0.05m~5m at 10% reflectivity, with an ambient light immunity of 2m@70KLux.
What accuracy and repeatability does the LRF10VB provide?
Accuracy is ±5cm (<5m) and 1% (≥5m), and repeatability is ±10mm.
What is the measurement frequency of the LRF10VB?
The frequency is 50Hz.
What supply voltage, power consumption and interface does the LRF10VB use?
It runs on 4.5~5.5VDC with an average current of 5V@4mA and average power consumption <0.1W, supports low power mode, and communicates over UART.
What are the dimensions, weight and wavelength of the LRF10VB?
The module measures 12 x 7.5 x 9.1mm and weighs 1g, and it uses a 940nm laser with Class1 photobiological safety.
ORDERING INFORMATION
Is there a minimum order quantity?
There is no minimum order quantity. Single units and evaluation samples are accepted.
What is the sample lead time?
Samples are shipped within 1 week after order confirmation.
What is the batch production lead time?
Batch production is delivered within 1 month after order confirmation.
RELATED TECHNICAL GUIDES
Further ERDI Laser engineering references on 905 nm short-range LiDAR and ranging sensors: