Free shipping for orders more that $200
Free shipping for orders more that $200

Cart

Your cart is currently empty.

Continue shopping
1 / 4

LRF22VB High-Precision Single-Point LiDAR Module

Chat With Us

Reply within 24 hours

Delivery Time

3-5 days after payment

Shipment

Air freight

DESCRIPTION

The LRF22VB-02 LiDAR sensor is a newly released laser ranging module built on the Direct Time-of-Flight (DTOF) principle, specially engineered for use in scenarios like drones, sweeping robots, and industrial robots. It adopts a 905nm wavelength laser compliant with Class 1 eye safety standards, delivering exceptional performance alongside a compact form factor and cost-effectiveness, while boasting strong resistance to ambient light interference.

TECHNICAL SPECIFICATIONS

#

Model

LRF22VB

1

Range

 0.05m~20m (90%reflectivity),

0.05m~10m (10%reflectivity)

2

Frequency

200Hz(Alternative100/50/20/10/1Hz)

3

Accuracy

±5cm (<5m ) ,1% (≥5m)

4

Repeatability

±30mm

5

Ambient Light Immunity

8m@60KLux

6

Central Wavelength

905nm

7

Photobiological Safety

Class1

8

FOV

3°

9

Wavelength for Indication

N/A

10

Photobiological Safety for Indication

N/A

11

Supply Voltage

3 ~ 3.6VDC

12

Peak Current

3.3V@70mA

13

Average Current

3.3V@40mA

14

Average Power Consumption

<0.2W

15

Communication Interface

UART/IIC

16

Protection Level

N/A

17

Dimension

21x 15 x 7.43 mm

18

Weight

1.5g

19

Operating Temperature

-20℃ ~  +60℃

20

Wire Specification

6pin 0.8mm terminal,

HC-0.8-6PWT with 20cm tinned stranded wires

21

Customization

available in appearance / structure / output protocol

(Note: 1. This parameter was measured at 25°C in an indoor environment. 2. This parameter was measured with a 90% reflector in an outdoor environment at 25°C.)

OUTLINE DIMENSION(mm)

PIN INTERFACE

No.

Definition / Wire Color

User Interface

1

NC (White)

/

2

3.3V (Red)

External Power +

3

TX (SCL)(Yellow)

RX(SCL)

4

RX(SDA) (Green)

TX(SDA)

5

NC (Blue)

/

6

GND (Black)

External Power -

 

APPLICATION NOTES

The LRF22VB is a direct time-of-flight single-point module specified for 0.05–20 m on 90% reflectivity targets and 0.05–10 m on 10% reflectivity targets at 905 nm, Class 1, with a 3 deg field of view and a 200 Hz default rate that can be set to 100, 50, 20, 10 or 1 Hz. A 3~3.6 VDC supply drawing 3.3 V at 70 mA peak and 40 mA average, 1.5 g mass and a 21 x 15 x 7.43 mm outline make it suited to drones, sweeping robots and industrial robots running from a single small cell.

The 200 Hz rate supports continuous updates on fast-moving or rapidly changing scenes, and the wider 3 deg field of view tolerates aim error, which is typically used where a robot needs presence, gap or stop-line detection rather than a precisely boresighted axis. Ambient light immunity of 8 m at 60 KLux defines the daylight limit, so the module is normally applied indoors or in short-range outdoor work where the return is strong.

SELECTION GUIDANCE

Select the LRF22VB when the highest update rate in this single-point range and a 3~3.6 V rail matter more than reach. If 20 m at 90% and 10 m at 10% reflectivity will not cover the scene, the LRF50VB extends to 50 m and 20 m in a 1.3 g body at a fixed 100 Hz; if 100 m or more is required, the 905 nm LiDAR family is the correct comparison; where a visible aiming aid helps installation, the LRF50H provides a coaxial 650 nm light.

At acceptance, verify 20 m at 90% and 10 m at 10% reflectivity, the 8 m at 60 KLux immunity figure, accuracy of ±5 cm below 5 m and 1% at and beyond 5 m, ±30 mm repeatability, the 200 Hz default plus each selectable lower rate, the 3~3.6 VDC window at 70 mA peak and 40 mA average, UART and IIC operation, and 1.5 g in the 21 x 15 x 7.43 mm outline.

FREQUENTLY ASKED QUESTIONS

What is the measuring range of the LRF22VB?
It measures 0.05m~20m at 90% reflectivity and 0.05m~10m at 10% reflectivity, with an ambient light immunity of 8m@60KLux.

What are the accuracy and repeatability of the LRF22VB?
Accuracy is ±5cm (<5m) and 1% (≥5m), and repeatability is ±30mm.

What measurement frequency does the LRF22VB support?
The frequency is 200Hz, with alternative options of 100/50/20/10/1Hz.

What supply voltage, power consumption and interface does the LRF22VB use?
It operates on 3 ~ 3.6VDC with an average current of 3.3V@40mA and average power consumption <0.2W, and supports UART/IIC communication.

What are the dimensions and weight of the LRF22VB?
The module measures 21x 15 x 7.43 mm and weighs 1.5g, with a FOV of 3° and Class1 photobiological safety at 905nm.

ORDERING INFORMATION

Is there a minimum order quantity?
There is no minimum order quantity. Single units and evaluation samples are accepted.

What is the sample lead time?
Samples are shipped within 1 week after order confirmation.

What is the batch production lead time?
Batch production is delivered within 1 month after order confirmation.

RELATED TECHNICAL GUIDES

Further ERDI Laser engineering references on 905 nm short-range LiDAR and ranging sensors:

LRF22VB High-Precision Single-Point LiDAR Module LRF22VB High-Precision Single-Point LiDAR Module LRF22VB High-Precision Single-Point LiDAR Module LRF22VB High-Precision Single-Point LiDAR Module

You may also like