DESCRIPTION
The LRF15E01ES is a 1570nm OPO laser rangefinder module powered by diode-pumped laser technology. This optoelectronic unit integrates optical, mechanical and electronic assemblies, supporting effective ranging distances of no less than 15 km.
Benefiting from compact form factor, lightweight structure and excellent stability, the module realizes high-accuracy measurement for long-range targets.
It finds broad applications across geophysical surveying, topographic mapping, airport monitoring, urban infrastructure development and other sectors.
TECHNICAL SPECIFICATIONS
| Eye safety/level |
Class1/1M |
| Laser Wavelength |
1570nm |
| Ranging Capability |
≥15km (under standard visibility, large target, reflectivity ≥20%)
≥8km (under standard visibility, 2.3m*2.3m target, reflectivity ≥20%)
|
| Minimum Ranging Distance |
50m |
| Ranging Accuracy |
≤1m(RMS) |
| Ranging Frequency |
1~20Hz |
| Accuracy |
≥98% |
| Multi-target detection |
≥1. lf more targets are needed, the communication protocol should be customized. |
| Divergence Angle |
≤1.4mrad |
| Dimensions (Length * Width * Height) |
≤159mmx83mmx48mm |
| Weight |
≤800g |
| Power Supply |
28VDC+10% |
| Power Consumption |
Average power consumption ≤30W |
| Communication Interface |
RS422 |
| Operating Temperature |
-40℃~+60℃ |
| Storage Temperature |
-55℃℃~+70℃ |
| Vibration and Shock |
Meeting the relevant requirements of GJB150.16A.2009 |
OUTLINE DIMENSION(mm)

ELECTRICAL INTERFACE
The upper computer and this rangefinder are connected through an aviation connector, which is an electrical interface.
1. Power supply interface: DC26V to DC30V (28VDC recommended); average power consumption ≤30W, peak power ≤250W;
2. Communication interface: RS422.
Table 1 Electrical interface
|
Electrical Interface Diagram
|
 |
|
Pin
|
interface definition
|
note
|
|
1~4
|
DC Power Supply
|
+28V DC
|
|
5~8
|
DC Power Supply Ground
|
+28V Ground
|
|
9
|
Serial Port T+ (Transmission + from Laser Rangefinder to Platform)
|
RS422
|
|
10
|
Serial Port R- (Reception - from Platform to Laser Rangefinder)
|
|
11
|
Serial Port T- (Transmission - from Laser Rangefinder to Platform)
|
|
12
|
Serial Port R+ (Reception + from Platform to Laser Rangefinder)
|
|
13
|
RS422 Communication GND (Optional, can be left unconnected)
|
|
14
|
SYN+
|
RS422 Differential External Time Synchronization
|
|
15
|
SYN-
|
|
upper computer electrical interface
|
J30J-15TJ with approx. 200 mm cable, supplied by the manufacturer
|
|
APPLICATION NOTES
At ≤800 g in a ≤159 mm × 83 mm × 48 mm body, this 1570 nm eye-safe OPO module is the lightest configuration in the family, and that is the parameter that decides its use: it reaches ≥15 km against large targets and ≥8 km against a 2.3 m × 2.3 m target at reflectivity ≥20% under standard visibility while remaining light enough for a handheld or small-gimbal payload. ≤1 m (RMS) accuracy, a 50 m minimum ranging distance, a 1–20 Hz ranging frequency and an accuracy rate ≥98% describe a measurement chain suited to repeated field readings rather than single spot checks.
Average consumption ≤30 W on a 28 VDC ±10% supply with an RS422 interface, at least one detected target per shot, and ≤1.4 mrad divergence, matches portable and vehicle-mounted observation heads. The datasheet names geophysical surveying, topographic mapping, airport monitoring and urban infrastructure development as target sectors — sector-level mapping work of the kind covered in the site's surveying, terrain survey and long-range observation topics, where eye-safe operation near crews and equipment matters as much as the distance figure. GJB150.16A.2009 vibration and shock compliance with operation from −40 °C to +60 °C and storage from −55 °C to +70 °C supports transportable deployment.
SELECTION GUIDANCE
Select this module when mass and envelope dominate — ≤800 g and ≤159 × 83 × 48 mm — and a ≥15 km large-target / ≥8 km reflective-target capability with ≤1 m (RMS) accuracy is enough. If the requirement extends beyond 15 km on large targets, the longer-range 1570 nm units in the family are the correct step, at higher mass and volume. If the widest beam of the family is unacceptable for small targets at long stand-off, compare the tighter-divergence modules before fixing the optical layout. Because the reflective-target figure is 8 km, target size should be agreed in writing before range acceptance.
Acceptance checks: Class 1/1M marking, ≥15 km on large targets and ≥8 km on a 2.3 m × 2.3 m target at reflectivity ≥20%, a 50 m minimum range, ≤1 m (RMS) accuracy, the 1–20 Hz band, ≥98% accuracy rate and ≤1.4 mrad divergence. Confirm ≥1 target per shot and any protocol customisation, the 28 VDC ±10% input against the J30J-15ZK pinout including SYN+/SYN−, average consumption ≤30 W, ≤800 g mass with the ≤159 × 83 × 48 mm outline, and the GJB150.16A.2009 vibration and shock evidence.
FREQUENTLY ASKED QUESTIONS
What is the ranging capability of the LRF15E01ES?
It ranges ≥15km on a large target with reflectivity ≥20% and ≥8km on a 2.3m*2.3m target with reflectivity ≥20%, both under standard visibility.
What is the ranging accuracy and frequency of the LRF15E01ES?
The ranging accuracy is ≤1m (RMS) and the ranging frequency is 1~20Hz, with an accuracy of ≥98%.
What laser technology and wavelength does the LRF15E01ES use?
It is a 1570nm OPO laser rangefinder module powered by diode-pumped laser technology, with an eye safety level of Class1/1M.
What power supply and interface does the LRF15E01ES require?
The module takes 28VDC+10% (DC26V to DC30V, 28VDC recommended) with average power consumption ≤30W, and communicates over RS422.
What are the dimensions and weight of the LRF15E01ES?
Its dimensions are ≤159mmx83mmx48mm and its weight is ≤800g, with a divergence angle of ≤1.4mrad.
ORDERING INFORMATION
Is there a minimum order quantity?
There is no minimum order quantity. Single units and evaluation samples are accepted.
What is the sample lead time?
Samples are shipped within 1 week after order confirmation.
What is the batch production lead time?
Batch production is delivered within 1 month after order confirmation.
RELATED TECHNICAL GUIDES
Further ERDI Laser engineering references on 1570 nm OPO eye-safe laser ranging modules: