DESCRIPTION
The LRF20D01ES is a 1570nm eye-safe laser rangefinder built upon diode-pumped OPO technology. The optoelectronic module delivers tight integration of optical, mechanical and electronic assemblies.
Under standard visibility, it supports effective ranging up to a minimum of 20 km against large targets with reflectivity ≥20%, and no less than 10 km for a 2.3m × 2.3m target with the same reflectivity.
The unit features compact form factor, lightweight construction, robust reliability and extended service life.
TECHNICAL SPECIFICATIONS
|
Eye safety/level
|
Class1/1M
|
|
Laser Wavelength
|
1570nm
|
|
Ranging Capability
|
≥20km (under standard visibility, large target, reflectivity ≥20%)
≥10km (under standard visibility, 2.3m*2.3m target, reflectivity ≥20%)
|
|
Minimum Ranging Distance
|
50m
|
|
Ranging Accuracy
|
≤1m(RMS)
|
|
Ranging Frequency
|
25Hz
|
|
Ranging Duration
|
≥30s
|
|
Divergence Angle
|
≤0.8mrad
|
|
Dimensions (Length * Width * Height)
|
≤183mm×65mm×108mm
|
|
Weight
|
≤1200g
|
|
Power Supply
|
28VDC±10%
|
|
Power Consumption
|
Average power consumption ≤50W; peak power consumption ≤250W
|
|
Communication Interface
|
RS422
|
|
Operating Temperature
|
-40℃~+60℃
|
|
Storage Temperature
|
-55℃~+70℃
|
|
Vibration and Shock
|
Meeting the relevant requirements of GJB150.16A.2009
|
OUTLINE DIMENSION(mm)

ELECTRICAL INTERFACE
The upper computer and this rangefinder are connected through an aviation connector, which is an electrical interface.
1. Power supply interface: DC26V to DC30V (28VDC recommended); average power consumption ≤30W, peak power ≤250W;
2. Communication interface: RS422.
Table 1 Electrical interface
| Electrical Interface Diagram |
 |
|
Pin
|
interface definition
|
note
|
|
1~4
|
DC Power Supply
|
+28V DC
|
|
5~8
|
DC Power Supply Ground
|
+28V Ground
|
|
9
|
Serial Port T+ (Transmission + from Laser Rangefinder to Platform)
|
RS422
|
|
10
|
Serial Port R- (Reception - from Platform to Laser Rangefinder)
|
|
11
|
Serial Port T- (Transmission - from Laser Rangefinder to Platform)
|
|
12
|
Serial Port R+ (Reception + from Platform to Laser Rangefinder)
|
|
13
|
RS422 Communication GND (Optional, can be left unconnected)
|
|
14
|
SYN+
|
RS422 Differential External Time Synchronization
|
|
15
|
SYN-
|
|
upper computer electrical interface
|
J30J-15TJ with approx. 200 mm cable, supplied by the manufacturer
|
|
APPLICATION NOTES
This 1570 nm eye-safe module spans ≥20 km against large targets and ≥10 km against a 2.3 m × 2.3 m target at reflectivity ≥20% under standard visibility, with ≤1 m (RMS) accuracy and a 50 m minimum ranging distance. What makes it notable inside the family is the combination of that reach with ≤0.8 mrad divergence, a fixed 25 Hz ranging frequency and a stated ranging duration of ≥30 s — a configuration typically used where a stabilised sight must produce a dense, continuous distance track against a moving subject rather than periodic samples.
The mechanical envelope drives the mission: ≤183 mm × 65 mm × 108 mm and ≤1200 g, on a 28 VDC ±10% supply with RS422 and a peak consumption of ≤250 W. A 65 mm width is narrow enough to sit alongside imaging optics in a compact observation head or pod bay, which is where the site's airborne pod and long-range observation applications place equipment of this class. GJB150.16A.2009 vibration and shock compliance, operation from −40 °C to +60 °C and storage from −55 °C to +70 °C extend the same unit to vehicle-mounted and shipborne mounts.
SELECTION GUIDANCE
Select this model when a pod or compact observation head needs many measurements per second — 25 Hz with ≥30 s of continuous ranging — at ≤1200 g in a ≤183 × 65 × 108 mm body, and when ≥20 km / ≥10 km covering large and 2.3 m × 2.3 m targets is sufficient. If the installation can accept a larger body and needs a longer maximum range or a wider selection of rate settings, a heavier 1570 nm unit in the family is the step up; if the host only requires a 1–20 Hz stream, the alternative modules offer comparable accuracy at similar mass. Confirm that a fixed 25 Hz rate suits the host's sampling and interface timing before committing.
Acceptance checks: Class 1/1M marking, ≥20 km on large targets and ≥10 km on a 2.3 m × 2.3 m target at reflectivity ≥20%, a 50 m minimum range, ≤1 m (RMS) accuracy, 25 Hz ranging frequency, a ranging duration of ≥30 s, and ≤0.8 mrad divergence. Verify the 28 VDC ±10% input against the J30J-15ZK pinout including the SYN+/SYN− differential time-synchronisation pair, peak consumption ≤250 W, ≤1200 g mass, the ≤183 × 65 × 108 mm outline against the host drawing, and the GJB150.16A.2009 vibration and shock evidence.
FREQUENTLY ASKED QUESTIONS
What is the ranging capability of the LRF20D01ES?
Under standard visibility the module reaches ≥20km for large targets with reflectivity ≥20%, and ≥10km for a 2.3m*2.3m target with the same reflectivity.
What is the ranging accuracy of the LRF20D01ES?
Ranging accuracy is ≤1m(RMS), and the minimum ranging distance is 50m.
What is the ranging frequency and ranging duration of the LRF20D01ES?
Ranging frequency is 25Hz and the ranging duration is ≥30s.
What are the dimensions and weight of the LRF20D01ES?
Dimensions (length × width × height) are ≤183mm×65mm×108mm and the weight is ≤1200g.
What is the operating temperature range of the LRF20D01ES?
Operating temperature is -40℃~+60℃, with a storage temperature range of -55℃~+70℃.
ORDERING INFORMATION
Is there a minimum order quantity?
There is no minimum order quantity. Single units and evaluation samples are accepted.
What is the sample lead time?
Samples are shipped within 1 week after order confirmation.
What is the batch production lead time?
Batch production is delivered within 1 month after order confirmation.
RELATED TECHNICAL GUIDES
Further ERDI Laser engineering references on 1570 nm OPO eye-safe laser ranging modules: