DESCRIPTION
The 1535nm laser ranging module utilizes an eye-safe wavelength (Class 1 IEC 60825-1) with a compact design (typical size ≤107×62×72mm, weight ≤335g) and low power consumption, enabling ultra-long-range detection (up to 20km, ±1m accuracy). This product is a transceiver lens, suitable for long-distance differential ranging, with a minimum ranging distance of not less than 50 meters.
TECHNICAL SPECIFICATIONS
|
Project
|
Performance Indicators
|
|
Model
|
LRF1222C
|
|
Laser Wavelength
|
1.54μm±0.02μm
|
|
Eye- safety
|
Class Ⅰ
|
|
Divergence Angle
|
≤0.3 mrad
|
|
Laser Energy
|
≥300 μJ
|
|
Launch Lens Diameter
|
Φ16.5 mm
|
|
Receiver Lens Diameter
|
Φ40 mm
|
|
Measuring Range
(Reflectance 30%; visibility ≥ 12 km.)
|
NATO objective(2.3m×2.3m) ≥12 km
|
|
Minimum Range
|
≤40 m
|
|
Ranging Frequency
|
0.5Hz ~10Hz
|
|
Number of multi-target detections
|
RS422
|
|
Ranging Accuracy
|
±2 m
|
|
Range Resolution
|
≤0.1 m
|
|
Precision Rate
|
≥98%
|
|
False Alarm Rate
|
≤1%
|
|
Communication interface
|
TTL
|
|
Supply Voltage
|
DC12 V
|
|
Standby power consumption
|
≤1.2W
|
|
Average power consumption
|
≤2 W
|
|
Peak Power Consumption
|
≤3W@10Hz
|
|
Weight
|
≤335g
|
|
Dimension (L×W×H)
|
107×62×72mm
|
|
Operating Temperature
|
-40~+70 ℃
|
|
Storage Temperature
|
-55~+75 ℃
|
|
Impact Resistance
|
Meet the MIL-STD-810G testing standard
|
|
Vibration Resistance
|
Meet the MIL-STD-810G testing standard
|
OUTLINE DIMENSION(mm)

PIN INTERFACE
Electrical connector model: Molex51021-0500. The detailed definition of the electrical interface is as follows:
Table 1 Interface definition
|
PIN
|
Definition
|
Remark
|
|
1
|
TTL RX
|
3.3V
|
|
2
|
TTL TX
|
3.3V
|
|
3
|
CTRL
|
3.3V-5V power on, 0V power off
|
|
4
|
+5V
|
Power supply+
|
|
5
|
GND
|
Power supply-
|
APPLICATION NOTES
The module transmits at 1.54 μm ±0.02 μm in the eye-safe Class Ⅰ band with ≤0.3 mrad divergence, ≥300 μJ pulse energy and a Φ40 mm receiver aperture, and that combination defines where it is typically used. Against a NATO 2.3 m × 2.3 m target of 30 % reflectance and visibility ≥12 km it delivers ≥12 km, with ±2 m ranging accuracy, ≤0.1 m range resolution, ≥98 % precision rate and ≤1 % false alarm rate over a 0.5 Hz to 10 Hz repetition band. A minimum range of ≤40 m and a 107 × 62 × 72 mm, ≤335 g transceiver-lens assembly suit long-distance differential ranging from stabilised observation platforms, optoelectronic pods and airborne payloads, including the long-range channel described in our optoelectronic pod sensing notes. Standby consumption of ≤1.2 W with ≤2 W average and ≤3 W peak at 10 Hz keeps the module inside a shared payload power budget, and the −40 °C to +70 °C operating range, −55 °C to +75 °C storage range and MIL-STD-810G impact and vibration compliance match the shock, vibration and thermal cycling screening set out in our laser module reliability validation notes.
SELECTION GUIDANCE
Select this model where a single long-range channel of ≥12 km on NATO targets at 30 % reflectance is the acceptance criterion and the integrator can accept a transceiver-lens assembly of that envelope. Where the acceptance target is a 4 m × 6 m objective at ≥15 km visibility and an uncased, RS422-linked build at lower weight is preferable, the LRF1221C in the same 12 km group is the closer fit. Where 10 km, 8 km or 6 km already covers the engagement geometry, the LRF1017C, LRF0815C and LRF0612C trade range for substantially lower mass and standby power, and the 58 g, 4.5 V to 16 V class suits UAV gimbals. Verify at incoming inspection: wavelength tolerance and Class Ⅰ marking, divergence ≤0.3 mrad, energy ≥300 μJ, both aperture diameters, minimum range, accuracy and resolution measured against a 30 % target, precision and false alarm statistics across the full repetition band, standby, average and peak consumption at 10 Hz, and the MIL-STD-810G impact and vibration reports. Confirm pin-out and logic levels against the drawing issued with the unit.
FREQUENTLY ASKED QUESTIONS
What is the maximum ranging distance of the LRF1222C?
It reaches ≥12 km on a NATO objective of 2.3m×2.3m, measured at 30% reflectance with visibility ≥12 km.
What is the eye safety class and wavelength of the LRF1222C?
It is an eye-safe Class 1 (IEC 60825-1) module operating at 1.54μm±0.02μm.
What are the ranging accuracy and minimum range?
Ranging accuracy is ±2 m with a range resolution of ≤0.1 m, and the minimum range is ≤40 m.
What are the weight, dimensions and connector of the LRF1222C?
It weighs ≤335 g and measures 107×62×72mm. The electrical connector model is Molex51021-0500, with pins TTL RX, TTL TX, CTRL, +5V and GND.
What is the power consumption of the LRF1222C?
It is powered from DC 12 V with standby ≤1.2 W, average ≤2 W and peak ≤3W@10Hz.
ORDERING INFORMATION
Is there a minimum order quantity?
There is no minimum order quantity. Single units and evaluation samples are accepted.
What is the sample lead time?
Samples are shipped within 1 week after order confirmation.
What is the batch production lead time?
Batch production is delivered within 1 month after order confirmation.
RELATED TECHNICAL GUIDES
Further ERDI Laser engineering references on 1535 nm eye-safe laser ranging modules and TOF sensors: